- Traditional trekking 35-degree back sweep handlebar - 6061-T6 polished aluminum with clear anodize or black anodize finish - RIDE+ versions have an integrated cable guide inside
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. -AL-6061 aluminum alloy -ISO4210 safety tested for city/trekking use -Not recommended for use with bar-ends or clip-on aero bars -50-degree sweep
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. -Four rise options available from 30-100mm -AL-6061 aluminum alloy -ISO4210 Safety Tested for City/Trekking use -Not recommended for use with bar-ends or clip-on aero bars -15-degree sweep
A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
- Traditional trekking 20-degree back sweep handlebar - 6061-T6 polished aluminum with clear anodize or black anodize finish - RIDE+ versions have an integrated cable guide inside
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
- Butted 6061 aluminum - Double butted 6061 alloy - 35mm rise - 9 degree sweep - Width: 670mm - 25.4mm center section
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
$32.95 - $43.95
- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
The flat +/-5mm bar packs the material technology, strength and weight you expect from a Ritchey bar, with an additional +/-5mm of height adjustment. - Double Butted 6061 Alloy Construction - +/-5mm rise - Width / Sweep: 720mm / 9 degrees - BB Black Finish - 276g
Ritchey's Comp Rizer Handlebar - Double butted 6061 alloy - Rise: 20mm - 9 degree sweep - Width: 740mm - 31.8mm O/S center section - Finish: BB Black - Weight: 380g
$35.00 $69.99 50% Savings
The Race Lite Riser mountain bike handlebar is the perfect lightweight weapon for a hard-fought PR on a local climb or even a podium at the local cross-country race, or a durable tool for long excursions along epic singletrack. Triple-butted alloy keeps it stiff and light for power and strength. - Triple-butted, tapered wall, 7050-T6 alloy construction - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup - Bar end compatible - Go green and save green - Zero packaging means zero waste and zero extra cost
Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 353g - Note: Salt Flat bars are not compatible with bar ends
- Strong and reliable 6061-T6 aluminum construction designed for urban-fixie use - Narrow 500mm (19.7") width perfect for the tarmac - Polished silver with black graphics
- Short reach, shallow drop with a smooth, double-radius drop section - Center section is aero bar compatible - No-slip grit at stem and brake lever mounting surfaces - Double Butted 6061 Alloy - Measured Center-to-Center where the levers mount - 31.8mm O/S center section - Drop/Reach: 128/73mm - 300g (42cm)
Follow the trail wherever it leads with the super-strong alloy handlebar designed to stand up to the rigors of variable off-road terrain. The Bontrager Approved 31.8 alloy handlebar is shot-peened for durability and single-butted to save weight. Key features: - Single-butted, tapered-wall, 6061-T6 alloy construction - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - Bar end compatible
Bontrager's Race Riser bar is crafted from custom-butted 6061-T6 aluminum for great strength, stiffness, and light weight. The shot-peened finish increases the fatigue life and adds a great look. And the 25mm rise is just enough to give you extra control and confidence in rough downhills without being too high for the climbs.
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center
Budget-friendly mountain bars with stylish flair. Tapered AL6061/T6 construction with shot-peened finish for durability and long-life.
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
$40.00 $69.99 43% Savings
Bontrager's Race Lite Low Riser bar is crafted from custom-butted 7050-T6 aluminum for great strength, stiffness and light weight. The shot-peened finish increases the fatigue life and adds a great look. Measurement marks on the clamping surface and grip area make it easy to set up your perfect fit. And you can make your ride distinctly your own with your choice of red, blue, gold or classic black.
$40.00 $79.99 50% Savings
Wide stance, dialed profile for ideal position. Stiff, quad-butted alloy. There's strong, and then there's Rhythm Elite Rhythm Elite is a quad-butted alloy riser bar designed with a beefy mid-section that hits back on aggressive trails while still remaining light and stiff enough to hammer back up to do it again. - Quad-butted, tapered wall, 7050-T6 alloy construction - Wide center section for increased stiffness - Laser-etched brake lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - Go green and save green – Zero packaging means zero waste and zero extra cost
These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center
R12's AO BMX Handlebars are ready for the street, made of burly heat-treated chromoly.
Page 1 of 6 Next page