Your Search: "respro"

The Powa™ Elite valve pack contains two Powa™ Elite valves that can be used in the majority of Respro® Masks (with the exception of the Metro™ Mask). The larger valves provide rapid exhalation of heat, water vapour and Carbon dioxide and has a variable vane system to maximise airflow when it comes to elevated breathing rates while exercising. The valves come in four different colour combinations, black-gold, black-silver or white-gold, white-silver.

The Respro® Nitesight™ mask is made of 100% Scotchlite™ with its filter (Dynamic ACC) offering filtration from the inhalation of pollutants associated with vehicle exhaust emissions. The Scotchlite™ skin makes the user highly visible during low light or night time conditions, with the two essential exhalation valves allowing unwanted heat, carbon dioxide and water vapour out. The Nitesight™ mask has a contoured design ensuring the mask ‘seals’ comfortably and is manufactured from hypo-allergenic Neoprene. It is available in two sizes.

The Cinqro™ mask is the most recent addition to the Respro® range. It focuses on the ‘urban trainer’, the ‘home runner’ or the multi-sport end user where breathing rates are typically higher than your average commuter. The two new Powa™ Elite valves on the Cinqro™ mask allow for faster air flow when working out at elevated breathing patterns, i.e. when you are giving it the beans from A to B. This equates to less back-pressure, less dampness in the filter, improved filtration and lower inhalation resistance, which in turn leads to improved comfort and performance. Inside each Cinqro™ box are two filters; one already fitted in the mask, the other a spare. The two included are; a Hepa-Type particle filter and a DACC™ chemical/particle filter. The Hepa-Type, filters out fine respirable, sub-micron dusts. The DACC™ filters out primary pollutants associated with vehicle exhaust emissions. Both are interchangeable making the Cinqro™ mask suitable for use in a wider variety of environments from inner cities to the countryside. Finally, a graphics rebuild for the look of the mask, fits it squarely in the sports arena rather than the ‘scare the hell out of everyone’ arena. NB: This mask SHOULD NOT be used for INDUSTRIAL APPLICATIONS where a device complying with European Directive 89/686 or 89/656 is required. It should only be used to reduce discomfort caused by exposure to, non-toxic particles where the concentrations do not exceed the National permissible exposure limit for the work place.

The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

The MET Estro MIPS is a versatile road helmet ready for your longest day on the bike. As comfortable as a top-of-the-line helmet, its design is widely open to maximize ventilation at low speeds. With 26 vents, 17 of which are inlets and 9 are exhaust holes, all of them work in synergy with the internally engineered air channeling system to ensure maximum ventilation. The Estro MIPS is also exceptionally comfortable. The 360° head belt in the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull, and its internal shape is welcoming for almost all different shaped heads. Featuring the MIPS-C2 brain protection system, the MET Estro MIPS is able to slide against the head in the event of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The front of the helmet features two dedicated ports for securely docking sunglasses while resting or climbing. The design reflects the purpose - to adapt to various uses and environments. Widely open, deeper coverage, a versatile visor, and a full polycarbonate wrap that makes it more durable by avoiding exposure of EPS surfaces to outdoor conditions. - In-mold polycarbonate shell with EPS liner - Full polycarbonate wrapped EPS liner to enhance durability - Extended head coverage for more thorough skull protection - MIPS-C2 Brain Protection System add protection in case of certain impacts - MET Safe-T Upsilon Fit System - 360° head belt and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamics and comfort - Sunglass ports to securely dock sunglasses - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Certifications CE; AS/NZS; US

The Summit Barrier Jacket is small enough to be stored in your hip pack or downtube, so you're always prepared on the go. It's ultra-lightweight Ripstop fabric is windproof and sheds light precipitation. A three-piece hood designed to pull over your helmet adds serious protection and the full-length zipper makes it easy to put this jacket on in a hurry. When not in use, the Summit Barrier Jacket packs into the zippered chest pocket. It's the ideal "just in case" piece for unpredictable weather. FEATURES - Constructed from ultra-light Ripstop fabric - Windproof, water-resistant - Durable water repellent (DWR) coating - Made from upcycled material - Full-length zipper - Zippered chest pocket - Hood under helmet design - Standard Fit - Made with upcycled materials FABRIC - 100% polyester Made in Vietnam

Experience one of nature’s finest fibers, Merino Wool. Our wool is soft against your skin and naturally moves moisture away from your feet while regulating temperature, so you stay cool in the summer, warm in the winter, and dry all year long. The Ultralight fits comfortably into lightweight technical shoes for a barely-there feeling. Pair these socks with your favorite outdoor activities like trail running or mountain biking for comfortable year-round wear. The FOUR (Quarter Crew) sits below the calf and is the tallest sock with our double-cuff construction. Our most popular cuff height for cycling and trail running. - Improved durability with high tenacity fibers in abrasion prone areas - Versatile mid-cushion option delivers lasting comfort and performance - Soft, natural Merino Wool - 63% MERINO WOOL / 35% Nylon / 2% Spandex - Made in USA

These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.

Perfect for stylish urban steeds, Continental's Retro Ride matches old-world looks with modern technology. Its smooth center tread ensures low rolling resistance, easy pedaling and confident cornering, making it great for commuting and all-around riding. A tough belt beneath the tread provides excellent puncture protection, and the Reflex reflective stripes add a bit of safety.

Retro RIDE – ride retro! The name is iconic. The large volume tyre has proven itself for use on cruisers and city bikes. It offers great comfort and stands for design and lifestyle. The tyre has the profile of the legendary Conti KKS 10 and is available in modern colours. A must-have for style experts.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.